Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://repositsc.nuczu.edu.ua/handle/123456789/11274
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorKoloskova, Ganna Mykolajivna-
dc.contributor.authorKoloskov, Volodymyr Yurijovych-
dc.date.accessioned2020-09-08T06:50:00Z-
dc.date.available2020-09-08T06:50:00Z-
dc.date.issued2020-05-
dc.identifier.citationJournal of Achievements in Materials and Manufacturing Engineering. – 2020. – Vol. 100, Issue 1. – Pp. 12-19.ru_RU
dc.identifier.urihttp://repositsc.nuczu.edu.ua/handle/123456789/11274-
dc.description.abstractPurpose: The aim of the represented study was to model the impact of temperature gradient on content of polymer ampoule during its forming. Design/methodology/approach: The model of polymer ampoules forming is built in SolidWorks software on the basis of finite element method. Using the developed model the study of temperature condition changes is carried out. Numerical modelling was carried out for two types of polymer packaging materials – polypropylene and polyvinylchloride – in similar conditions. Findings: During polymer ampoule forming the highest temperature of liquid is obtained at the bottom of it. The most effective packaging method is to form the ampoule from polypropylene by means of aluminium die. Investigation results have shown that the highest obtained liquid temperature has linear dependence from initial one. Linear coefficients of heating were evaluated for polypropylene (equal to 0.72) and polyvinylchloride (equal to 0.58). Practical implications: Decrease of initial liquid temperature value gives an opportunity to expand the range of products allowed to be packed in polymer ampoules in represented method. Safe conditions for packaging of liquid products in polymer ampoules are formulated, The results of the study may be used to improve the quality of liquid products packaging in polymer ampoules. Originality/value: For the first time the model was developed for determination of liquid heating degree during its packaging in polymer ampoules. The calculations of the temperature distribution are represented for polypropylene and polyvinylchloride ampoules forming by means of aluminium and ceramic dies. The results of the study may be of interest to specialists in the field of polymer packaging manufacturing for food or pharmaceutical industry.ru_RU
dc.language.isoenru_RU
dc.publisherJournal of Achievements in Materials and Manufacturing Engineeringru_RU
dc.subjectComputational material science and mechanicsru_RU
dc.subjectPolymer ampouleru_RU
dc.subjectHeating packaging methodru_RU
dc.subjectTemperature modellingru_RU
dc.titleModelling of impact of temperature gradient on content of polymer ampoule during its formingru_RU
dc.typeArticleru_RU
Розташовується у зібраннях:Кафедра прикладної механіки

Файли цього матеріалу:
Файл Опис РозмірФормат 
1264027.pdf537,17 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.