Please use this identifier to cite or link to this item:
Authors: Tsymbal, Bohdan
Borysov, Viacheslav
Solomko, Tetiana
Yamshinskij, Mykhail
Lukianenko, Ivan
Andreev, Andrey
Bratishko, Viacheslav
Bilko, Tamara
Rebenko, Victor
Chorna, Tetiana
Keywords: oxide anthropogenic waste, alloy steel scale, reduction melting, X-ray phase studies
Issue Date: Aug-2021
Publisher: Eastern-European Journal of Enterprise Technologies
Citation: doi:
Series/Report no.: ;4/12 (112)
Abstract: This paper reports a study into the peculiarities of the structural-phase composition of the alloy obtained by using anthropogenic waste from the production of high-alloy steels involving reduction melting. That is necessary for determining the technological parameters that could help decrease the loss of alloying elements in the process of obtaining and using a doped alloy. This study has shown that at an O:C ratio in the charge of 1.84, the alloy consisted mainly of the solid solution of carbon and alloying elements in α-Fe. The manifestation of Fe3C carbide with alloying elements as substitution atoms was of relatively weak intensity. At the O:C ratios in the charge of 1.42 and 1.17, there was an increase in the intensity of the Fe3C carbide manifestation. At the same time, the emergence of the carbide compounds W2C·Mo2C and WC was identified. Several phases with different content of alloying elements were present in the microstructure images. Cr content in the examined areas changed in the range of 0.64–33.86 % by weight; W content reached 41.58 % by weight; Mo –19.53 % by weight; V – 18.55 % by weight; Co – 3.95 % by weight. The carbon content was in the range of 0.28–2.43 % by weight. Analysis of the study results reveals that the most favorable ratio of O:C in the charge was 1.42. At the same time, the phase composition was dominated by a solid solution of the alloying elements and carbon in α-Fe. The share of the residual carbon concentrated in the carbide component was in the range of 0.52–2.11 % by weight, thereby ensuring the required reduction capability of the alloy when used. The study reported here has made it possible to identify new technological aspects of obtaining an alloy by utilizing anthropogenic waste, and whose indicators provide for the possibility of replacing part of standard ferroalloys when smelting steels without strict restrictions on carbon content.
Description: Borysov, V., Solomko, T., Yamshinskij, M., Lukianenko, I., Tsymbal, B., Andreev, A., Bratishko, V., Bilko, T., Rebenko, V., Chorna, T. (2021). Identification of the features of structural-phase transformations in the processing of waste from the production of high-alloy steels. Eastern-European Journal of Enterprise Technologies, 4 (12 (112)), 33–38. doi:
ISSN: 1729-3774
Appears in Collections:Кафедра охорони праці та техногенно-екологічної безпеки

Files in This Item:
File Description SizeFormat 
14425-7185-PB.pdf707,93 kBAdobe PDFView/Open
238763-Article Text-548834-1-10-20210826.pdf3,69 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.