DEVELOPMENT OF CONDITIONS FOR OBTAINING OIL FROM SUNFLOWER OIL HYDRATION WASTE

Abstract

The object of the study is the process of treatment of sunflower phosphatide concentrate using sodium chloride solution. Hydration is a stage of oil refining. The waste of the process is a phosphatide concentrate, the disposal of which is dangerous to the environment. The concentrate contains valuable components – oil and phosphatides. An important task is to separate these components for effective use in various industries. The process of extracting oil from phosphatide concentrate by hydration in the presence of sodium chloride solution was investigated. The influence of the concentrate treatment conditions on the oil yield was determined. A sample of concentrate according to SOU 15.4-37-212:2004 (CAS 3436-44-0) was used: mass fraction of moisture and volatile substances – 2.8 %, mass fraction of phosphatides – 41.5 %. The concentrate was treated with sodium chloride solution with a concentration of (5–20) %. The hydration time was 25 min., the temperature was 45 °C, and the mass ratio of the sodium chloride solution to the concentrate was 1:1. Conditions for the concentrate treatment were determined: the concentration of sodium chloride solution was 15 %, settling time was 5 hours. At the same time, the yield of oil was 86.9 %. The parameters of the extracted oil were determined: acid value 2.8 mg KOH/g, peroxide value 3.2 ½ O mmol/kg, mass fraction of moisture and volatile substances 0.12 %. According to these indicators, the extracted oil corresponds to firstgrade unrefined unfrozen sunflower oil according to DSTU 4492. The mass fraction of phosphorus-containing substances in terms of stearooleolecithin was 1.7 %, which slightly exceeds the standard value. The research results make it possible to process hydration waste and obtain oil, which is a raw material for the products of many industries. This will help solve the problem of disposal of environmentally hazardous waste and improve the state of the environment