1. eNUCPUIR
  2. Факультет пожежної безпеки
  3. Кафедра автоматичних систем безпеки і інформаційних технологій
Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://repositsc.nuczu.edu.ua/handle/123456789/20680
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorDurieiev, Viacheslav-
dc.contributor.authorBondarenko, Serhij-
dc.contributor.authorAntoshkin, Oleksiy-
dc.contributor.authorGrigorov, Andrey-
dc.contributor.authorVavreniuk, Sergii-
dc.contributor.authorYurchenko, Liubov-
dc.date.accessioned2024-10-14T07:46:35Z-
dc.date.available2024-10-14T07:46:35Z-
dc.date.issued2024-07-08-
dc.identifier.citationhttps://www.vurup.sk/wp-content/uploads/2024/07/PC-X_Hryhorov_2024_44.pdfuk_UA
dc.identifier.issn1337-7027-
dc.identifier.urihttp://repositsc.nuczu.edu.ua/handle/123456789/20680-
dc.descriptionOver the past decade, recycling technologies have been rapidly developing as an integral part of the technological process of commercial production, particularly in the petrochemical industry. This is primarily due to the optimization of production costs, the shortage of highquality hydrocarbon feedstock for production and the significant accumulation of production and consumption waste hazardous to the environment. Thus, activities related to the development and production of petroleum products, including greases derived from recycled materials such as various types of waste, have recently gained popularity. And the products of such technologies - greases - can partially satisfy the growing demand for lubricants and are increasingly widely used in various industriesuk_UA
dc.description.abstractThe article presents the results of a study of the effect of base oil on the lubricating properties of plastic lubricants obtained from secondary raw materials - used lubricating oils and crushed solid polymers (LDPE and HDPE, PP). It was established that the viscosity of the base oil and the type of polymer thickener significantly affect both the colloidal stability of the plastic lubricant and its lubricating properties. The best lubricating properties were demonstrated by plastic lubricants obtained from SAE 85W-90 transmission base oils (ν100=30.0 mm2/s) thickened with crushed HDPE products. Moreover, when comparing these two-component greases with industrial analogues, it was found that their lubricating properties significantly exceed those of companies Agrinol Solidol G0, G1; Agrinol Fiol 1, 2) and are at the level of plastic lubricants Mobil Grease Special; NESTE MP Grease; Shell RETINAX Grease CMX1,2; Mobilux EP.uk_UA
dc.language.isoenuk_UA
dc.subjectGreases; Recycled materials; Polymers; Base oil; Thickener; Viscosity; Colloidal stability; Lubricating propertiesuk_UA
dc.titleStudy of the Influence of Base Oil on the Lubricating Properties of Greases Obtained from Secondary Raw Materialsuk_UA
dc.typeOtheruk_UA
Розташовується у зібраннях:Кафедра автоматичних систем безпеки і інформаційних технологій

Файли цього матеріалу:
Файл Опис РозмірФормат 
55 Дурєєв скопус 2024.pdf516,64 kBAdobe PDFПереглянути/Відкрити
Показати базовий опис матеріалу Перегляд статистики


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.