Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://repositsc.nuczu.edu.ua/handle/123456789/26605
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorКірєєв, О.О.-
dc.contributor.authorДаник, О.М.-
dc.contributor.authorНуянзін, В.М.-
dc.contributor.authorГапон, Ю.К.-
dc.date.accessioned2025-12-09T14:29:15Z-
dc.date.available2025-12-09T14:29:15Z-
dc.date.issued2025-
dc.identifier.citationKireev A., Hapon Yu., Nuianzin V., Danyk O. Investigation of Fire Extinguishing Properties of Multicomponent Systems with Combined Action Based on Wetted Lightweight Bulk Materials for Extinguishing Polar Flammable Liquids. Materials Science Forum. 2025, Vol. 1165, pp 83-89uk_UA
dc.identifier.otherhttps://doi.org/10.4028/p-dns7O5-
dc.identifier.urihttp://repositsc.nuczu.edu.ua/handle/123456789/26605-
dc.description.abstractTo extinguish flammable polar liquids, it is proposed to use a multicomponent fire extinguishing system consisting of one or two layers of wetted lightweight bulk materials. It has been established that wetting bulk materials leads to a significant increase in the following components of fire extinguishing action: cooling, insulation, and dilution. In addition, the introduction of water into the fire extinguishing system leads to a decrease in the concentration of vapors of polar flammable liquids above the fire extinguishing layer of bulk materials due to their absorption by water. Crushed foam glass with a granule size of 10–15 mm was selected as a bulk material for the formation of the base layer of the fire extinguishing system. To improve the insulating properties of the base layer, it is proposed to apply swollen perlite with a granule size of 1.0–1.4 mm or swollen lamellar vermiculite with a scale size of 1Ч2.5 mm to its surface. Such sizes of perlite and vermiculite particles enable them to fill the cavities between the granules of the foam glass base layer, which leads to an increase in the insulating properties of the fire extinguishing system. The following were experimentally determined: bulk density, buoyancy in methanol, ethanol, propanol-2, and acetone, moisture retention of bulk materials, and the fraction of material that spilled through the foam glass layer. The fire extinguishing capacity of the proposed fire extinguishing systems based on bulk materials in the case of extinguishing polar flammable liquids was experimentally determined. The systems based on bulk materials have a combined fire extinguishing effect by the following mechanisms of combustion termination: cooling, insulation, and dilution. It is concluded that the advantages of the proposed system in comparison with existing fire extinguishing agents for polar flammable liquids are substantiateduk_UA
dc.language.isoenuk_UA
dc.publisherTrans Tech Publicationsuk_UA
dc.subjectvermiculiteuk_UA
dc.subjectperliteuk_UA
dc.subjectketonesuk_UA
dc.subjectfoam glassuk_UA
dc.subjectflammable polar liquidsuk_UA
dc.subjectfire extinguishing systemuk_UA
dc.subjectbulk materialsuk_UA
dc.subjectalcoholsuk_UA
dc.titleInvestigation of Fire Extinguishing Properties of Multicomponent Systems with Combined Action Based on Wetted Lightweight Bulk Materials for Extinguishing Polar Flammable Liquidsuk_UA
dc.typeArticleuk_UA
Розташовується у зібраннях:Кафедра радіаційного і хімічного захисту

Файли цього матеріалу:
Файл Опис РозмірФормат 
КірєєвТТР.pdfГасіння полярних рідин298,33 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.