Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://repositsc.nuczu.edu.ua/handle/123456789/7501
Название: INVESTIGATION OF THE COMBINATION OF ITO/CdS/CdTe/Cu/ Au SOLAR CELLS IN MICROASSEMBLY FOR ELECTRICAL SUPPLY OF FIELD CABLES
Другие названия: http://journals.uran.ua/eejet/article/view/124575
Авторы: N.Deyneko, O.Semkiv, I.Khmyrov, A.Khryapynskyy
Ключевые слова: film photocell; micromodule; electrical commutation; solar cell; cadmium telluride; current-voltage characteristic
Дата публикации: 2018
Библиографическое описание: Eastern European Journal of Enterprise Technologies/Східно-Європейський журнал передових технологій/Восточно-Европейский журнал передовых технологий
Краткий осмотр (реферат): Studies aimed at optimizing the design of micromodules based on ITO/CdS/CdTe/Cu/Au photoelectric converters, which are used in autonomous power plants for field camps, have been carried out. To use photoelectric converters as power sources, they are combined into micromodules and modules. The nature of commutation of single solar cells in the microassembly significantly affects the output characteristics of the micromodule and, consequently, the efficiency of the photoelectric converter as a whole. It is found that the series connection of the ITO/CdS/CdTe/Cu/Au PEC in the micromodule ensures its stability even if the output parameters of one or more single solar cells fail or deteriorate. If the composition of the micromodule includes a solar cell with significantly worse output characteristics, or there are several such elements, then when they are connected in series, the efficiency of the micromodule is several times higher than for a parallel cell. With the series connection of the ITO/CdS/CdTe/Cu/Au PEC in the micromodule composition, experimental samples of the micromodule with an efficiency of 5.3 % are obtained, which is almost 2 times higher than for parallel connection of the same PEC
Описание: Obuhov, S. G., Plotnikov, I. A. (2012). Sravnitel'niy analiz skhem avtonomnyh elektrostanciy, ispol'zuyushchih ustanovki vozobnovlyaemoy energetiki. Promyshlennaya Energetika, 07, 46–51. Kirichenko, M. V., Zaitsev, R. V., Deyneko, N. V., Kopach, V. R., Antonova, V. A., Listratenko, A. M. (2008). Influence of Constructive and Technological Solutions of Silicon Solar Cells on Minority Carrier Parameters of Base Crystals. Telecommunications and Radio Engineering, 67 (3), 227–240. doi: 10.1615/telecomradeng.v67.i3.40 Khrypunov, G., Vambol, S., Deyneko, N., Sychikova, Y. (2016). Increasing the efficiency of film solar cells based on cadmium telluride. Eastern-European Journal of Enterprise Technologies, 6 (5 (84)), 12–18. doi: 10.15587/1729-4061.2016.85617 Sites, J. R. (1988). Separation of voltage loss mechanisms in polycrystalline solar cells. Conference Record of the Twentieth IEEE Photovoltaic Specialists Conference. doi: 10.1109/pvsc.1988.105983 Bonnet, D. (1992). The CdTe thin film solar cell – an overview. International Journal of Solar Energy, 12 (1-4), 1–14. doi: 10.1080/01425919208909746 Mitchell, K., Fahrenbruch, A. L., Bube, R. H. (1977). Photovoltaic determination of optical‐absorption coefficient in CdTe. Journal of Applied Physics, 48 (2), 829–830. doi: 10.1063/1.323636 Chu, T. L., Chu, S. S. (1993). Recent progress in thin-film cadmium telluride solar cells. Progress in Photovoltaics: Research and Applications, 1 (1), 31–42. doi: 10.1002/pip.4670010105 Bonnet, D., Harr, M. (1998). Manufacturing of CdTe solar cell. Proc. of 2nd World Conference on Photovoltaic Solar Energy Conversion, 397–402. Romeo, N., Bosio, A., Romeo, A. (2010). An innovative process suitable to produce high-efficiency CdTe/CdS thin-film modules. Solar Energy Materials and Solar Cells, 94 (1), 2–7. doi: 10.1016/j.solmat.2009.06.001 Wu, X., Keane, J. C., Dhere, R. G., DeHart, C., Albin, D. S., Duda, A. et. al. (2001). 16.5%-Efficient CdS/CdTe polycrystalline thin-filM solar cell. 17th European Photovoltaic Solar Energy Conference. Munich, GerMany, 995–1000. Raushenbach, H. S. (1980). Solar Cells Array Design. New York: Litton Uducation Publishing, 250. Zi, S.; Suris, R. A. (Ed.) (1984). Fizika poluprovodnikovyh priborov. Moscow, 456. Vasil'ev, A. M., Landsman, A. P. (1971). Poluprovodnikovye fotopreobrazovateli. Moscow, 248. Khrypunov, G., Meriuts, А., Klyui, N., Shelest, Т., Deyneko, N., Kovtun, N. (2010). Development of back contact for CdS/Cdte thin film solar cells. Functional Materials, 17 (1), 114–117. Lisachuk, H. V., Kirichenko, M. V., Khrypunov, H. S., Zaitsev, R. V., Kopach, V. R. (2008). Pat. No. 33676 UA. Svitlodiodnyi osvitliuvach. MPK: G01R 31/26, H01L 21/66. published: 10.07.2008, Bul. No. 13. Meriuts, A. V., Khrypunov, G. S., Shelest, T. N., Deyneko, N. V. (2010). Features of the light current-voltage characteristics of bifacial solar cells based on thin CdTe layers. Semiconductors, 44 (6), 801–804. doi: 10.1134/s1063782610060187
URI (Унифицированный идентификатор ресурса): http://repositsc.nuczu.edu.ua/handle/123456789/7501
ISSN: 1729-3774
Располагается в коллекциях:Кафедра наглядово-профілактичної діяльності

Файлы этого ресурса:
Файл Описание РазмерФормат 
124575-266075-1-PB.pdf886,36 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.